Find everything you need to get certified on Fabric—skills challenges, live sessions, exam prep, role guidance, and a 50 percent discount on exams.
Get startedEarn a 50% discount on the DP-600 certification exam by completing the Fabric 30 Days to Learn It challenge.
Hi,
I have the following the following report page with a date slicer and a table.
- The date slicer comes from a date table that DOES NOT have a relationship with my facts table.
-The "Max" date in the date slicer is used for the "Calculation" measure (DAX below), which essentially is a SWITCH Function that handles the following conditions.
1) If "End Date" <= "Max" date in the date slicer then return the full value of "Dollars"
2) If "Start Date" = "Max" date in the date slicer then return daily rate of "Dollars" (Dollars / (End Date - Start Date)
3) If "End Date" > "Max" date in the date slicer then return the daily rate * ("Max" date in the date slicer - Start Date)
Calculation Dax
I suspect this is due to the lack of row context when referring to the "Max" start and "end" dates for the total calculations, so the max values of the entire dataset are used rather than calculating row by row.
Here is a link to the pbix file: https://drive.google.com/drive/folders/1GjFTpaLMW-6vf36LFPpHR_IHuhtaAcPL?usp=sharing
Please let me know if any additional information is needed. Any input is appreciated. Thanks!
Solved! Go to Solution.
Hi @bbzzbb808 ,
Thanks for the reply from @DataNinja777 , please allow me to provide another insight:
You can using the following measure.
Measure =
SUMX(
VALUES('Fact Table'[ID]),[Calculation])
Best Regards,
Liu Yang
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Thank you both! Appreciate the help
Hi @bbzzbb808 ,
Thanks for the reply from @DataNinja777 , please allow me to provide another insight:
You can using the following measure.
Measure =
SUMX(
VALUES('Fact Table'[ID]),[Calculation])
Best Regards,
Liu Yang
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Hi @bbzzbb808
You can get the correct total of the rows in the visual by using Sumx function. Sumxing Calculation dax over the ID field will get you the correct total you are after.