New Idea

Support for AD authentication in custom visuals

Status: Accepted
by karaoan ‎09-25-2018 11:34 PM - edited ‎09-25-2018 11:35 PM

We have already raised this with the respective team @ MS for months and have been told this is "on the horizon". So, this post only to show we are not the only ones needing this: we urgently require support for AD authentication in custom visuals. Microsoft is already including it in their own visuals (PowerApps visual) so it shouldn't be too hard to also offer it with 3rd party custom visuals.

Status: Accepted

Thanks for reaching out.
Yes, 3rd party authntication is in our backlog, we are in the planning stages.

Enable drill through on Custom Visuals

Status: Accepted
by Goofr Regular Visitor on ‎07-05-2018 12:09 AM

Like on standard visuals it would be much apprceciated to be able to drill through to an other page from a Custom Visual.

 

Thanks in advance,

 

Frank

Status: Accepted

The Drill Through feature is on backlog.

We'll update once it's implemented.

 

Ignat Vilesov,

Software Engineer

 

Microsoft Power BI Custom Visuals

pbicvsupport@microsoft.com

Provide access to the viewport height and width through when developing a custom visual. When developing custom visuals that act as controls like date range pickers or combo boxes the visual cannot extend beyond the visual host.

The only way to make the visual useful is to provide enough height and width for the visual when building your report, this takes up tons od sapce and make the report development and use very clunky

 

Gantt Chart, Collapsed with Milestones

Status: Accepted
by tab13 Visitor on ‎01-22-2018 08:18 AM

Needed: Gantt chart where 1) each row is its own project, 2) shows segments (bars) for time segments, and 3) shows milestones that can be labeled and be different colors.

 

ProjectTimingCard.png

Status: Accepted

Gantt Chart needs Milestones

Status: Accepted
by nogi Regular Visitor on ‎10-02-2017 08:39 PM

The Gantt chart needs to be enhanced in order to be able to display miletones as well. Currently, milestone name appears on the axis but not on the timeline due to the duration being = 0. Easy solution would be to display 0 duration tasks with a diamond or something along those lines.

Status: Accepted

3-Way Venn Diagram (Proportional and Dynamic)

Status: New
by BrettHermann Frequent Visitor ‎05-23-2017 10:27 AM - edited ‎05-23-2017 11:07 AM

Create a custom 3-way venn diagram that is both proportional and dynamic. It should take in three different boolean fields for each record. Each selected boolean field will represent one circle.

 

The area of each circle should be determined on the number of records (sum of records) when the field = 1. The overlapping areas when two or more fields are true should also be proportional** to the rest of the segments of the visualization. 

 

(**Doesn't necessarily need to be exact mathematically, but at least have the circle and segment areas appear proportional to the rest of the segments)

 

When the data source updates, the visualization should be dynamic in nature so that it's always reflecting the current data that it's build from.

 

Have functionality to clearly label each circle / overlap areas, in addition to allowing the user to select colours.

 

3-Way proportional venn example..png

Enable Report Tooltips on Custom Visuals

Status: Accepted
by DebbieE Member on ‎08-29-2018 02:13 AM

It would be great if you could use Report Tooltips on Custom visuals. Im aware that adding drill through into custom visuals is already being looked at, If this could be added, that would be great.

Status: Accepted

Dual Y axis in Line chart

Status: Delivered
by vemuria Frequent Visitor on ‎04-04-2017 11:58 AM

Hi, 

We would like to use a Line chart with dual Y-axis (like secondary Y axis we have in combo chart). 

Any ideas if the visualization already exists which I can import and reuse?

Status: Delivered

Power KPI supports dual Y-axis now.

 

 

Hi All,


Greeting for the Day!


I was wondering if someone can build of one very important visuals missing from Power BI gallery is Breakdown or dependencies tree,
this will help us to design a good view and give us more room for other visuals to add in our dashboard.

I wish if someone could do it would be great. Below is one such example. Thank you again.

This is an open source code so you can use the code to build the Power BI Customs visual. Thank you!!!

 

http://vizuly.io/product/weighted-tree/?demo=d3js

 

Regards
Sohail

Make Custom Visuals More Prominent in UI/Office Store

Status: Delivered
by cwebb22 Frequent Visitor on ‎07-14-2017 02:25 PM - last edited on ‎08-13-2018 04:28 AM by Ranin Visitor

Custom Visuals are a great idea, and awesome differentiator when compared to competing products. They bring a ton of new and experiential use cases. To increase adoption and awareness, please promote certified custom visuals in Power BI by featuring these visuals more prominently within the Power BI ecosystem (desktop, service, office store).

 

To do so, you might:

  • Call certified visuals out in the office store
  • Add a dedicated tab in the office store and Power BI custom visuals UI
  • Make "certified" visuals searchable (use terms such as "certified" in search box for visuals)
  • Add a "certified" badge to promote visuals that have achieved formal certification

Certified Custom Visuals.pngWhat this *might* look like

Status: Delivered

Org chart visual

Status: Delivered
by thomaskrekling Frequent Visitor on ‎07-30-2017 11:18 PM

Would be great to have an org chart visual 

Status: Delivered

Hierarchy Chart by Akvelon implements requested functionality.

A Timeline slicer that is not massive

Status: Accepted
by robrien6 Regular Visitor on ‎02-27-2018 02:15 AM

Hi,

 

This is a simple idea that reflects most of the review feedback for the otherwise excellent timeline slicer.

 

*Please can we have a version of this visual that is not massive?*

 

Its a great slicer - but its like putting duplo with Lego - it looks ridiculous in the context of a report with almost any other tiles on it.

 

Please can we have one that scales well to a "normal" size and ideally works with sync slicers/seledctmoin pane bookmarks.

 

Many Thanks,

Russ

Status: Accepted

Gantt Chart for repeated tasks

Status: New
by TDJ Visitor on ‎01-08-2018 08:14 AM

Hi,

 

What would be a great addition to the power BI visualisations, is a Gantt chart for repeated tasks (see added picture, from the website here, i used this tutorial to create such a chart in excel)

 

On the X axis a timeline, Y axis is category, and plotted is time elapsed, with Time_start and duration of the datapoints.

 

There is a gantt chart available in the store, but this doesn't work with repeated tasks.

 

A visualisation like this would be great for uptime analysis of machines, factories, ....

 

How to Make a Gantt Chart for Repeated Tasks 02

Hi All,

Greeting for the Day!!!

Hope you’re doing well.

Thank you for sharing custom visuals.

I was wondering if anyone could build one very important visuals missing from Power BI gallery is “Concept Network Browser”.

This will help all the users to design a single view for a multiple data set and give us more room for other visuals to add in dashboard.

I wish if this could be done so it would be great help and useful. Below is the link for a Concept network browser.

 

http://www.findtheconversation.com/concept-map/

 

This Visual has the potential to change the Power BI customs for good. Hope you can find some time to build this visual. Thank you!!!

 

Regards
Sohail

Stack + Cluster Chart

Status: New
by chhabraswati New Member on ‎04-25-2017 02:47 AM

Hey, I was struggling to make a chart which was a combination of stack and cluster graphs. Although I figured out a way, but thought that it would be helpful if we can have this graph in the Power BI gallery as well.

 

Attached is the screenshot of the same:

Stack + Cluster.jpg

Date slicer: obtain start date and end date from calculated columns or measures

Status: New
by siacc Frequent Visitor ‎04-11-2017 08:32 AM - edited ‎04-14-2017 06:06 AM

Hi all,

 

I would suggest an idea to improve date slicer.

It could be beautiful if you could set start date and end date of the slicer with a value given from a calculated column or measure.

 

For example, it could be beautiful if you could set

 

Start Date = NOW()

End Date = Start Date + 15 days (or Start Date + 30 days, or StartDate + 7 days... And so on Smiley Happy )

 

End Date could change dinamically based to the Start Date Value (NOW()).

 

What do you think about?

 

Cheers.

Enable slicer sync on the Timeline custom visual

Status: Accepted
by ThomasFoster Established Member ‎02-21-2018 07:36 AM - edited ‎02-21-2018 07:36 AM

The Timeline custom slicer is very useful and allows for far easier period selection than the stock timeline slicer. Yet it does not work with slicer sync. If this support can be added it would be very helpful.

Status: Accepted

Developing a Control Chart

Status: New
by ejmartin23 Visitor ‎03-21-2017 01:01 PM - edited ‎03-21-2017 01:03 PM

See https://www.isixsigma.com/tools-templates/control-charts/a-guide-to-control-charts/

 

How can this NOT be included with PowerBI?!?  Control Charts are one of the foundational reasons to visualize data.

We would like a KPI visual that shows the percentage change over the current year, combined with the trend month by month.

With the standard KPI visual, you always see the latest change% when you add a trend ...So when you show the trend by month in the current KPI Visual, the kpi value shown is the change over the current month.  We would like to see the overall YTD change% (from 1/1 until today) as KPI value and in the trend the monthly change% (so for each month the change from the first day until the last day of that month)

 

remark : a YTD calculation will not work because we have daily data that can not be added up (for ex daily inventory levels)

 

I suppose we will need the KPI value independant from the datetime-category used in the trend

 

Any idea if this already exists ?

Hi is it possible to create a chart where the x axis would carry a cumulative total and the y axis would show a percentage like the attached. Also each bar in the chart should be a stacked chart where 2 measures can be visualised. For example for product A the sale is $250 with a contributions margin of 36% and a net profit margin on 20%. It would be really helpful if a similar visual can be developed. Thanks alot!

 

 Chart.png

Idea Statuses