cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
juan_pablo
Helper IV
Helper IV

"There are pending changes in your queries that haven't been applied" doesn't goes away

Hi,

After April's update, some of my report appeared with the warning message: "There are pending changes in your queries that haven't been applied". I then click "Apply Changes", Power BI applies the changes, and few seconds later, the warning message appears again.

This doesn't affect the report (in fact, I didn't made any changes to the queries, the warning just appeared after the update), but it takes space on the canvas and it's annoying to always have that warning covering the top centimeters of the report.

 

Is there any solution to this? May's update didn't solved the issue.

42 REPLIES 42
isalamat
Advocate I
Advocate I

Just had the same problem with my dataset. Solved it by going to Transform Data, Refresh Preview - Refresh All. It ran a refresh on the tables and after Close & Apply the annoying message disappered. Hopefully this helps someone. 

Can you be more specific with steps? I can't get it to work. Thanks 

On the top of the main screen you can see Transform Data option. Screenshot 2022-08-12 081551.png

When you select Transform Data, a new window will open up, it's called Power Query. On the top of the new window you'll see Refresh Preview option, and if you expand that option you'll need to select Refresh All. 

Screenshot 2022-08-12 081654.png

It will run a refresh for a few minutes and then you can select Close & Apply in the top left corner. This should fix your dataset. I hope this helps. 

Hey, Thanks for the solution. The pop up disappeared as of now. Phew!

It worked for me as well. Thanks for the answer!

This fix has also worked for me! Thank you!

I just encountered the same issue and your solution worked for me; thank you!

Syndicate_Admin
Administrator
Administrator

I have this error: ExecuteXmla failed with result

Feedback Type:
Frown (Error)

Timestamp:
2021-08-17T05:57:59.8752303Z

Local Time:
2021-08-17T01:57:59.8752303-04:00

Session ID:
459176b7-e7e7-4c87-8caf-85b86819fd54

Release:
August 2021

Product Version:
2.96.701.0 (21.08) (x64)

Stack Trace:
Microsoft.PowerBI.Client.Windows.AnalysisServices.XmlaExecutionException
at Microsoft.PowerBI.Client.Windows.AnalysisServices.AnalysisServicesService.ExecuteXmla(String xmla)
at Microsoft.PowerBI.Client.Windows.AnalysisServices.AnalysisServicesService.<>c__DisplayClass45_0.<ImageLoadDatabaseFromPbix>b__0()
at Microsoft.PowerBI.Client.Windows.AnalysisServices.AnalysisServicesService.OnErrorClarify(Action action, String clarification)
--- End of stack trace from the previous location where the exception occurred ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at Microsoft.PowerBI.Client.Windows.IExceptionHandlerExtensions.<>c__DisplayClass3_0.<HandleExceptionsWithNestedTasks>b__0()
at Microsoft.Mashup.Host.Document.ExceptionHandlerExtensions.HandleExceptions(IExceptionHandler exceptionHandler, Action action)

PowerBINonFatalError:
{"AppName":"PBIDesktop","AppVersion":"2.96.701.0","ModuleName":"Microsoft.PowerBI.Client.Windows.dll","Component":"Microsoft.PowerBI.Client.Windows.AnalysisServices.AnalysisServicesService","Error":"Microsoft.PowerBI.Client.Windows.AnalysisServices.XmlaExecutionException - PFE_SYSTEM","MethodDef":"ExecuteXmla","ErrorOffset":"112"}

InnerException0.Stack Trace:


OS Version:
Microsoft Windows NT 10.0.19042.0 (x64 es-MX)

CLR Version:
4.7 or later [Release Number = 528372]

Peak Virtual Memory:
102 GB

Private Memory:
303 MB

Peak Working Set:
434 MB

IE Version:
11.789.19041.0

User ID:
0c9d0889-1e44-4e49-9ad9-acf00bc70fd6

Telemetry Enabled:
True

DPI Scale:
100%

Supported Services:
Power BI

PeteD1302
Helper I
Helper I

I am having this issue after installing the PBI 22 September 2020 Desktop 64bit update; this has not occurred with any previous update over the last 2 years or more.

No matter what I do the pending changes message will not disapear, and occurs with a desktop file whne it first opens, this messsage did not appear anytime while using the September PBI Update.

I also cannot delete any tables in the desktop as the changes must be applied first. I can add new tables.PBI_Pending changes_7-Oct-20.jpg

Hi PBI Community, Would appreciate some help here, the update for October 2020 has not removed the "There are pending changes in your queries that have not been applied". This is only occurring in some of my desktops, and only for tables that come from SQL data servers. Other desktops using the same SQL data servers do not have this Applied query.

I can add new tables from the SQL server but cannot remove and existing tables excpet for ones created by me from an excel source file from my local PC.

I did re-install the August 2020 version and the pending changes query does not appear, and re-appears with teh October 2020 version.

Hi PeteD1302, I had the same problem and I am going to explain the solution as detailed as posible. 

 

First, this issue is affecting your transformations because it doesn't find an example file (this was my problem). When you have a sample file to implement a function to make transformations, this sample file is being used as a parameter, as you can see in the image (sorry it is in spanish but you will be able to follow allong the image). 

sample image.png

The relationship between the sample file and the parameter is now broken, so your transformation can't be done, despite it use to work (I don't know yet why it breaks). You have to enter to the parameter and remake the conection to the example file in order to restore the function, this is fair simple and probably will be done automatically. This issue will also affect your refreshes as power query does not know how to do them with out the sample file.

Once you go and fix all your parameters, the message will disapear and you will no longer have problems wth the report. 

I hope this can help you.

Mikelg
New Member

I had this same issue and I discovered that in my case the issue was directly related to Power Query functions that had "Enable load" hiddenly activated.

 

However, the hidden active state of "Enable load" of a function can only be deactivated when the function is "stale" (with the yellow triangle). If you click on "Refresh Preview" and the function reloads (showing the fx icon) then the "Enable load" option will be greyed out and appear as deactivated (no tickmark). I believe that this is a bug and that it remains hiddenly activated causing this issue.

 

I solved it as follows using the July 2020 version of Power BI:

    1. Clicked on the "x" on the yellow warning bar that said "there are pending changes in your queries...", and take note of which tables its identifying as stale
    2. Click on "Transform Data" to open the Power Query Editor
    3. Right click on all "stale" functions and deactivate "Enable Load"
    4. Close & Apply changes
    5. Refresh Power BI Report & Save

 

Probably the cause of this bug is that these functions were originally tables which were later converted into functions (modifying the first rows of the M code) and preserved the "Enable Load" active status.

 

Enable load shows up as activated then the functions are in stale stateEnable load shows up as activated then the functions are in stale state

 

"Enable load" option appears greyed out when the function refreshes properly"Enable load" option appears greyed out when the function refreshes properly

 

 

 

Hi,

I have the same issue.

I also disabled "Enable Load" by following above steps and have not get any success. The message in the yellow rectangle still stays on the Power BI Desktop.

Not sure who can help

Try the solution posted here by parry2k: 

Solved: Re: "there are pending changes in your queries" wo... - Microsoft Power BI Community

I got the error message to go away by changing the names of my parameters in Power Query. But the important first step is to click Discard and note what it says it is discarding. In my case, it listed the parameters. 

 

Hello rakter, I have just replied above with another option for the solution. You just need to reconfigure the parameters as it seems they are broken (I don't know why they break) but that was what worked for me. Just go to the parameter option and fix the link to the sample file.

 

Hope this can help you.

This works for me. I've been working for this for the past 3 days. Very simple solution. Thank you Matbau 😁

All I had to do to fix this same problem was rename the parameters. Literally just that simple. 

 

tjd
Impactful Individual
Impactful Individual

Happening to me also with the June 2020 release.  Could we please get a fix for this other than having to "rebuild" our model?

Anonymous
Not applicable

I am having exactly the same problem. Is there any solution to this? I am able to ignore it, but am not sure if there are any "knock on" effects.  I can neither Apply nor Discard the changes.

Anonymous
Not applicable

@v-diye-msft , can we get another look at this issue? It would be nice to get some sort of workaround other than "rebuild your whole PBIX". This looks like a legitimate bug and most likely due to the "enhanced metadata" preview feature. Thanks!

Helpful resources

Announcements
Difinity Conference

Difinity Conference 2022

Difinity is the largest Microsoft Data, AI, Power BI, Power Platform and Business Applications Conference in New Zealand.

European Share Point Conference

European Share Point Conference

This conference returns live and in-person in Copenhagen this 28 November-01 December with 4 Microsoft Keynotes, 9 Tutorials, and 120 Sessions.

Microsoft 365 Conference â__ December 6-8, 2022

Microsoft 365 Conference - 06-08 December

Join us in Las Vegas to experience community, incredible learning opportunities, and connections that will help grow skills, know-how, and more.