Showing results for 
Search instead for 
Did you mean: 
Advocate II
Advocate II

"There are pending changes in your queries that haven't been applied" doesn't goes away


After April's update, some of my report appeared with the warning message: "There are pending changes in your queries that haven't been applied". I then click "Apply Changes", Power BI applies the changes, and few seconds later, the warning message appears again.

This doesn't affect the report (in fact, I didn't made any changes to the queries, the warning just appeared after the update), but it takes space on the canvas and it's annoying to always have that warning covering the top centimeters of the report.


Is there any solution to this? May's update didn't solved the issue.

New Member

Just had the same problem with my dataset. Solved it by going to Transform Data, Refresh Preview - Refresh All. It ran a refresh on the tables and after Close & Apply the annoying message disappered. Hopefully this helps someone. 

This fix has also worked for me! Thank you!

I just encountered the same issue and your solution worked for me; thank you!


I have this error: ExecuteXmla failed with result

Feedback Type:
Frown (Error)


Local Time:

Session ID:

August 2021

Product Version:
2.96.701.0 (21.08) (x64)

Stack Trace:
at Microsoft.PowerBI.Client.Windows.AnalysisServices.AnalysisServicesService.ExecuteXmla(String xmla)
at Microsoft.PowerBI.Client.Windows.AnalysisServices.AnalysisServicesService.<>c__DisplayClass45_0.<ImageLoadDatabaseFromPbix>b__0()
at Microsoft.PowerBI.Client.Windows.AnalysisServices.AnalysisServicesService.OnErrorClarify(Action action, String clarification)
--- End of stack trace from the previous location where the exception occurred ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at Microsoft.PowerBI.Client.Windows.IExceptionHandlerExtensions.<>c__DisplayClass3_0.<HandleExceptionsWithNestedTasks>b__0()
at Microsoft.Mashup.Host.Document.ExceptionHandlerExtensions.HandleExceptions(IExceptionHandler exceptionHandler, Action action)

{"AppName":"PBIDesktop","AppVersion":"2.96.701.0","ModuleName":"Microsoft.PowerBI.Client.Windows.dll","Component":"Microsoft.PowerBI.Client.Windows.AnalysisServices.AnalysisServicesService","Error":"Microsoft.PowerBI.Client.Windows.AnalysisServices.XmlaExecutionException - PFE_SYSTEM","MethodDef":"ExecuteXmla","ErrorOffset":"112"}

InnerException0.Stack Trace:

OS Version:
Microsoft Windows NT 10.0.19042.0 (x64 es-MX)

CLR Version:
4.7 or later [Release Number = 528372]

Peak Virtual Memory:
102 GB

Private Memory:
303 MB

Peak Working Set:
434 MB

IE Version:

User ID:

Telemetry Enabled:

DPI Scale:

Supported Services:
Power BI

Helper I
Helper I

I am having this issue after installing the PBI 22 September 2020 Desktop 64bit update; this has not occurred with any previous update over the last 2 years or more.

No matter what I do the pending changes message will not disapear, and occurs with a desktop file whne it first opens, this messsage did not appear anytime while using the September PBI Update.

I also cannot delete any tables in the desktop as the changes must be applied first. I can add new tables.PBI_Pending changes_7-Oct-20.jpg

Hi PBI Community, Would appreciate some help here, the update for October 2020 has not removed the "There are pending changes in your queries that have not been applied". This is only occurring in some of my desktops, and only for tables that come from SQL data servers. Other desktops using the same SQL data servers do not have this Applied query.

I can add new tables from the SQL server but cannot remove and existing tables excpet for ones created by me from an excel source file from my local PC.

I did re-install the August 2020 version and the pending changes query does not appear, and re-appears with teh October 2020 version.

New Member

I had this same issue and I discovered that in my case the issue was directly related to Power Query functions that had "Enable load" hiddenly activated.


However, the hidden active state of "Enable load" of a function can only be deactivated when the function is "stale" (with the yellow triangle). If you click on "Refresh Preview" and the function reloads (showing the fx icon) then the "Enable load" option will be greyed out and appear as deactivated (no tickmark). I believe that this is a bug and that it remains hiddenly activated causing this issue.


I solved it as follows using the July 2020 version of Power BI:

    1. Clicked on the "x" on the yellow warning bar that said "there are pending changes in your queries...", and take note of which tables its identifying as stale
    2. Click on "Transform Data" to open the Power Query Editor
    3. Right click on all "stale" functions and deactivate "Enable Load"
    4. Close & Apply changes
    5. Refresh Power BI Report & Save


Probably the cause of this bug is that these functions were originally tables which were later converted into functions (modifying the first rows of the M code) and preserved the "Enable Load" active status.


Enable load shows up as activated then the functions are in stale stateEnable load shows up as activated then the functions are in stale state


"Enable load" option appears greyed out when the function refreshes properly"Enable load" option appears greyed out when the function refreshes properly




Impactful Individual
Impactful Individual

Happening to me also with the June 2020 release.  Could we please get a fix for this other than having to "rebuild" our model?

Not applicable

I am having exactly the same problem. Is there any solution to this? I am able to ignore it, but am not sure if there are any "knock on" effects.  I can neither Apply nor Discard the changes.

Not applicable

@v-diye-msft , can we get another look at this issue? It would be nice to get some sort of workaround other than "rebuild your whole PBIX". This looks like a legitimate bug and most likely due to the "enhanced metadata" preview feature. Thanks!

Frequent Visitor

I had the same problem and was able to solve the issue, but be aware!  You will have to recreate your relationships in the model and your calculated columns in the tables. It's not perfect, but it's a lot less work than rebuilding the report entirely.



I did the following:


1. I opened the file with the "Pending changes" issue and opened the Power Query editor

2. I opened a new power BI file and copied all the tables from the file with the "Pending changes"issue to the new file and loaded the tables in the new file

3. I deleted all tables in the Power Query Editor in the file with the "Pending changes" issue, except for my Measures table. I kept the measures table. So make sure all your measures are put in a measures table. Don't close the Power Query editor!

4. Open the Power Query editor in the new file and copy all tables (except for the measures table) back to your file with the "Pending changes" issue.

5. Close the Power Query editor in the file with the "Pending changes" issue and it will load all tables. The message should now disappear.

Frequent Visitor

This error may still occur in new desktop releases. In my case, this happened due to cross-references between two Queries. Query2 refers to the field Query1[Fileld_1] in calculations, and Query1 then gets the calculated [Fileld_2] from Query2. Getting rid of the cross-references, "Apply Changes" warning disappears. Apparently, this is a some kind of bug, because the link is a cross-reference, not cyclic, and all the queries work out without errors...

Had same issue. The offenders were two parameters. Added some text in the descriptions for both and applied updates. Now is fixed.

Thank you @Sebas2905  for your answer, seems it could work for small reports. Unfortunatelly your solution is not an option for me, I have more than 50 tables and hundreds of measures. The report is linked with a gateway and that could break the configuration in the PBI service. So I prefer to wait for a more formal solution.


Thank you anyway 😉




@juan_pablo : I understand. We also had to fix this issue in a report with almost 300 measures, 50 calculated columns and more than 30 tables. We had to do this, because it's a report which we've build for a client and we weren't able to apply any changes anymore in the report due to this bug. Support became impossible. It was a lot of work, but currently the only option. I hope a fix will be released for you soon, but keep in mind that it's possible that you will run into the same problem as we had, namely: not being able to apply any changes in the Power Query editor.


Good luck!

Try following solution


Download the latest June 2020 build (version: 2.82.5858.961). If the issue still exists, try the following:


    1. Click “Discard changes” on the yellow warning bar, and take note of which tables its identifying as stale
    2. In the Power Query Editor, change the description for each of the “stale” queries with value something like “test”
    3. Apply changes

I would  Kudos if my solution helped. 👉 If you can spend time posting the question, you can also make efforts to give Kudos whoever helped to solve your problem. It is a token of appreciation!

Visit us at, your one-stop shop for Power BI related projects/training/consultancy.

Did I answer your question? Mark my post as a solution.

Proud to be a Super User! Appreciate your Kudos 🙂
Feel free to email me with any of your BI needs.

Hi  @parry2k 

I still don't get why for some users the solution worked if there is no option "Discard Changes" on the yellow warning. Nor I can find stale tables, all are working fine. My only issue is with the yellow sing that doesn’t disappear even after hitting the “X” it pops again few seconds after.

Isn’t another solution for users that have metadata turned off?



Thanks this worked for me.  I just had to add a description to the impacted tables in Power Query.  Maybe related to the enhanced metadata breaking my existing tables.  

Not applicable

@parry2k  That worked! Thank you!!

Not applicable

@parry2k , unfortunately that did not work for me.

Helpful resources

August 1 episode 9_no_dates 768x460.jpg

The Power BI Community Show

Watch the playback when Priya Sathy and Charles Webb discuss Datamarts! Kelly also shares Power BI Community updates.

Power BI Dev Camp Session 24 without aka link and time 768x460.jpg

Ted's Dev Camp - July 28, 2022

Watch Session 24 of Ted's Dev Camp along with past sessions!

Power Platform Conf 2022 768x460.jpg

Join us for Microsoft Power Platform Conference

The first Microsoft-sponsored Power Platform Conference is coming in September. 100+ speakers, 150+ sessions, and what's new and next for Power Platform.

Top Solution Authors
Top Kudoed Authors