multiple slicers for two visuals

[jrbrown00]

I have 5 slicers and 2 visuals on a report.  I want 5 slicers to apply to Visual1 and 4 slicers to apply to Visual2.  Visual2 will have  the 5th field hardcoded and should not use the slicer.  The instructions seem straightforward, but I cannot get visual2 to ignore slicer5. 

Here is the screenshot for the visual1 setup. 

• Visual1 is selected
• Visual1 will use all 5 slicers (red outline1)
• Visual2 will ignore changes to Visual1 (red outline2)
• This works, all slicers control the appearance of Visual1

Here is the screenshot for the Visual2 setup

Visual2 

• Visual2 is selected
• Visual2 will ignore the slicer labelled _type_ (red outline3)
• Visual1 will ignore changes to Visual2 (red outline4)
• Visual2 is filtered to show only _type_=1011
• This does not work.  Visual2 is displaying the _type_ shown in the slicer.

What am I missing?

[AlexisOlson]

I think you might have your controls backward. In order for _type_ slicer to not filter Visual2, you need to click on the _type_ slicer and turn off filtering on Visual2.

What you currently have is that Visual2 won't filter _type_ or Visual1.

[jrbrown00]

It is my understanding that the filled in 'do not' in outline3 means that Visual2 will not use the _type_ slicer and that the filled in 'do not' in outline4 means that Visual2 will not honor any selections in Visual1.

Currently, Visual2 seems to be 'anding' both the _type_ slicer and the hard-coded filter inside Visual2.

Thoughts?

[AlexisOlson · Accepted solution]

Outline3 means that you are preventing Visual2 from filtering _type_ slicer. You are correct for Outline4.

A slicer is just another visual, so the controls are not reversed for these. It works the same as one matrix filtering another matrix. To prevent a slicer from filtering a matrix, you need to click on the slicer and click the 'do not filter' icon for the matrix.

[jrbrown00]

You are correct.   That fixed my problem. The _type_ slicer is just another visual.  Click on the _type_ slicer and then click  on the 'do not' icon so that Visual2 is not filtered based on the _type_ slicer.