I need some help with cumulative sum line.
Before selecting any slicer, the visual shows this:
But after applying filter, the visual shows the below.
How then can I make the line graph show the full graph, starting from zero to the end of the chart, similar to the first screenshot?
Solved! Go to Solution.
@NicklancerUpdate cummulative total DAX as give below and that will do it, as @Seward12533 suggested to use cross filter to both direction, it has performance hit but instead of setting up the relationship, you can use it in DAX formula basically you are using cross filter to both direction when required
Cumulative = CALCULATE( SUM('Table2'[Count]), CROSSFILTER(Table1[Week of Year],Table2[Week No.], Both), FILTER(ALL('Table2'), 'Table2'[Week No.]<=MAX('Table2'[Week No.])) )
@Nicklancer try this
Cumulative = VAR Result = CALCULATE( SUM('Table2'[Count]), CROSSFILTER(Table1[Week of Year],Table2[Week No.], Both), FILTER(ALL('Table2'), 'Table2'[Week No.]<=MAX('Table2'[Week No.])) ) RETURN IF(Result,Result,0)
Also what is your desired result? do you want the **bleep** to be unaffected by the filter or do you want the scale to be fixed? The problem is the **bleep** is being plotted on its own axis and PBI is dynamically adjusting it based on the data. Or do you want the other data to not be displayed and only show the filtered data?
If you want the **bleep** to adjust.
Look at either turning off the secondary Y axis to you **bleep** is plotted on the same scale (probably not what you want) or fixing the scales manually
If you want the **bleep** not be affected make sure you the USE the ALL filter(s) for the slicers your using
If you want the other data to be filtered out then adjust the visual interations and chose filter.
This is my desired result (lines in red), when sliced by category.
My Data (Table 1) looks like this, with the last column "Week No." is created in query editor:
And I have another table (Table 2) created to give me the following value (only the first column is from an excel sheet):
For cumulative column (note that I use excel to replicate these), I used the following measure:
'Table 2'[Week No.]<=MAX('Table 2'[Week No.]))
EDIT: I also tried adding a column for cumulative, which still yield the same visual results:
'Table 2'[Week No.]<=EARLIER('Table 2'[Week No.]))
Appreciate your help. Thanks.
Here you go:
It seems that you want to have a visual filter with cumulative Sum?
Could you share a screenshot of your visual filter setting?
Actually, if you have a visual filter for cumulative sum, it will show the values match the filter condition.
I used a donut chart based on the category. So for example, when no category is applied, it shows this:
When I choose a category, say for category A:
Now obviously this looks fine since this constitutes most of the values, however the cumulative line is still not right, as it still shows the total, not total by category.
This becomes ugly when I apply to Category C:
My slicer looks like this:
Hope my explanation is clear enough.
Here is the pbix file if anyone is interested: