Skip to main content
cancel
Showing results for 
Search instead for 
Did you mean: 

Earn the coveted Fabric Analytics Engineer certification. 100% off your exam for a limited time only!

Reply
gansoxd
Regular Visitor

Power BI Informix connection error

Hello,

 

I am trying to connect to Power BI using IBM Informix Database (Beta) but after I set up my credentials I get the following error:

 

Details: "Microsoft Informix Client: No such host is known SQLSTATE=08S01 SQLCODE=-1336".

 

I searched the forum but could not find any same error posts, so I am writing it here.

 

My connection is OK when I test on Setnet32.

 

I am currently using Power BI version 2.37.4464.361 64-bit.

 

I also tried to create and use ODBC but when I do, I get this error:

 

The DNS specified contains a mismatch architectures between the Driver and Application.

 

Any help?

1 ACCEPTED SOLUTION
gansoxd
Regular Visitor

After many unsucessful attempts, I contacted Microsoft support. After some remote access and data mining, the Power BI developer team found the problem:

 

After a few changes the error I was receiving changed from -1336 to -1040, wich meant EXCSAT_FAILURE, a protocol DRDA error from a Informix server.

 

Power BI uses DRDA protocol. I was using olsoctcp, I have been using the same port to all Microsoft products I currently use, so I had to change to a port that was configured with DRDA and it finally worked.

 

I'm replying to solve this topic and for anyone wich may have a similar problem.

View solution in original post

14 REPLIES 14
gansoxd
Regular Visitor

After many unsucessful attempts, I contacted Microsoft support. After some remote access and data mining, the Power BI developer team found the problem:

 

After a few changes the error I was receiving changed from -1336 to -1040, wich meant EXCSAT_FAILURE, a protocol DRDA error from a Informix server.

 

Power BI uses DRDA protocol. I was using olsoctcp, I have been using the same port to all Microsoft products I currently use, so I had to change to a port that was configured with DRDA and it finally worked.

 

I'm replying to solve this topic and for anyone wich may have a similar problem.

Hello gansoxd

 

Thanks for your solution.

Could you please post step by step how you change the port? did you do it on SetNet32?

 

Thank you!

 

shunsho

Hi gansoxd:

 

I am running into the same error that you initially reported (SQLCODE=-1336).

 

Where and how did you configure a port to use DRDA protocol to resolve the issue? Did you have to configure this port on the machine running Informix database server? Or did you configure this on the client machine running Power BI?

 

And how exactly did you configure this port? Did you have to load drivers from the Informix SDK to do it?

 

Thanks,

You might want to post your question and problem to the International Informix Users Group (IIUG) Forums. You can join the IIUG at www.iiug.org (membership is free) and then register for one or more of the forums there. Post you question and you are likely to get answers from experienced Informix users as well as Informix developers from IBM and HCL!

 

I would respond here, but for some reason I cannot see the OP's question and that previous thread, so I don't know exactly what your problem is. I do not monitor this forum (only saw this in a Google alert), so post to the IIUG Forums your original problem.

You might want to post your question and problem to the International Informix Users Group (IIUG) Forums. You can join the IIUG at www.iiug.org (membership is free) and then register for one or more of the forums there. Post you question and you are likely to get answers from experienced Informix users as well as Informix developers from IBM and HCL!

 

I would respond here, but for some reason I cannot see the OP's question and that previous thread, so I don't know exactly what your problem is. I do not monitor this forum (only saw this in a Google alert), so post to the IIUG Forums your original problem.

Hi gansoxd:

 

I am trying to troubleshoot the same error that you originally encountered.

 

My question is, how and where did you configure a port to use DRDA protocol? Did you have to configure a port on the machine running the Informix database server to use DRDA protocol? Or did you configure a port on the Windows client running Power BI to use DRDA?

 

Thanks,

Hi @gansoxd @arify@,

 

I noticed you are attempting a Pronto connection, which I am too but getting the same issue as you are.  What protocol did you end up using to make it work?  Or did you need Pronto to fix it up for you?

 

Sorry, I am not an IT person, so struggling with the tech speak.

arify
Employee
Employee

Hello arify, thanks for your reply.

 

Yes, I have seen this thread, but the error from it is SQLCODE=-1037 and my error is SQLCODE=-1366.

 

I checked everything from this thread but still can't connect.

Can you please send us a frown with traces?

 

For traces: Options > Diagnostics > Enable Tracing (Choose Verbose) > Open Traces folder, then reproduce the error. Trace files should appear in the traces folder. Please attach those traces in your frown email.

 

Thanks

Anonymous
Not applicable

Hi arify,

I tried to import data directly from Pronto and  was not succeessful. I tried both get data/from IBM informix  and also ODBC connection. I got  following errors. We also contacted our Pronto support and they confiigured the Port but still we get following errors. Could you please help?  is there any email that I can send trace fiules so can have a look? I am not able to attach them here.

 

EhsanHgh_1-1632784237639.png

 

 

EhsanHgh_0-1632784206333.png

Thank you!

 

Hi, arify.

 

I got the trace files but I don't know how to attach it to my frown email.

 

Should I post all the text here?

 

Also, there are 2 log files, wich one should I attach? Both?

 

This is the first one (Microsoft.Mashup.Container.NetFX40.6764.2016-08-11T12-08-37-342334).

Then there is another (PBIDesktop.6336.2016-08-11T12-08-18-998005). It is too big to post here as text.

 

Spoiler
DataMashup.Trace Information: 24579 : {"Start":"2016-08-11T12:08:37.3450103Z","Action":"BackgroundThread/RollingTraceWriter/CleanupOldTraces","ProductVersion":"2.37.4464.461 (PBIDesktop)","ActivityId":"00000000-0000-0000-0000-000000000000","Process":"Microsoft.Mashup.Container.NetFX40","Pid":6764,"Tid":4,"Duration":"00:00:00.0015948"}
DataMashup.Trace Information: 24579 : {"Start":"2016-08-11T12:08:37.7583268Z","Action":"SimpleDocumentEvaluator/BeginGetResult<IPreviewValueSource>/callback","ProductVersion":"2.37.4464.461 (PBIDesktop)","ActivityId":"7b89f82b-575c-4eda-b0fc-eb8d40b526d1","Process":"Microsoft.Mashup.Container.NetFX40","Pid":6764,"Tid":1,"Duration":"00:00:00.0011571"}
DataMashup.Trace Information: 24579 : {"Start":"2016-08-11T12:08:37.4603064Z","Action":"SimpleDocumentEvaluator/BeginGetResult<IValue>","ProductVersion":"2.37.4464.461 (PBIDesktop)","ActivityId":"7b89f82b-575c-4eda-b0fc-eb8d40b526d1","Process":"Microsoft.Mashup.Container.NetFX40","Pid":6764,"Tid":1,"Duration":"00:00:00.2991928"}
DataMashup.Trace Information: 24579 : {"Start":"2016-08-11T12:08:37.4447355Z","Action":"FirewallDocumentEvaluator/BeginGetResult","ProductVersion":"2.37.4464.461 (PBIDesktop)","ActivityId":"7b89f82b-575c-4eda-b0fc-eb8d40b526d1","Process":"Microsoft.Mashup.Container.NetFX40","Pid":6764,"Tid":1,"Duration":"00:00:00.3147719"}
DataMashup.Trace Information: 24579 : {"Start":"2016-08-11T12:08:43.0704875Z","Action":"Engine/IO/Db/Microsoft Informix Client/AuthorizationError","Exception":"Este host n\u00E3o \u00E9 conhecido SQLSTATE=08S01 SQLCODE=-1336","SqlCode":"-1336","ResourceExceptionKind":"None","ProductVersion":"2.37.4464.461 (PBIDesktop)","ActivityId":"7b89f82b-575c-4eda-b0fc-eb8d40b526d1","Process":"Microsoft.Mashup.Container.NetFX40","Pid":6764,"Tid":1,"Duration":"00:00:00.0010687"}
DataMashup.Trace Information: 24579 : {"Start":"2016-08-11T12:08:37.8978897Z","Action":"Engine/IO/Db/Microsoft Informix Client/RunWithRetry","ProductVersion":"2.37.4464.461 (PBIDesktop)","ActivityId":"7b89f82b-575c-4eda-b0fc-eb8d40b526d1","Process":"Microsoft.Mashup.Container.NetFX40","Pid":6764,"Tid":1,"Duration":"00:00:05.1908610"}
DataMashup.Trace Information: 24579 : {"Start":"2016-08-11T12:08:37.8859455Z","Action":"Engine/IO/Db/Microsoft Informix Client/RunWithRetry","ProductVersion":"2.37.4464.461 (PBIDesktop)","ActivityId":"7b89f82b-575c-4eda-b0fc-eb8d40b526d1","Process":"Microsoft.Mashup.Container.NetFX40","Pid":6764,"Tid":1,"Duration":"00:00:05.2041193"}

 

If trying the recommendations in the other thread didn't work, I don't really have much to add.. Can you send a frown email if you're sure it's not a network issue?

 

There's a smiley on the top left corner or PBI Desktop, right next to it there's a little down-button, you can see the send a frown button in there. Please add the traces as well (if they're too big you can attach as zip)

 

Thanks

Hi, arify, thanks again for your reply.

 

I just sent the frown. I hope it contains something useful.

 

Also, I sent it using the Power BI 32 bits version (at first I was using the 64 bits version but I downloaded the 32 bits version to test as well, sadly it didn't work too).

 

I can send it using the 64 bits version as well,  I don't think it will change too much.

 

Thanks in advance!

Helpful resources

Announcements
April AMA free

Microsoft Fabric AMA Livestream

Join us Tuesday, April 09, 9:00 – 10:00 AM PST for a live, expert-led Q&A session on all things Microsoft Fabric!

March Fabric Community Update

Fabric Community Update - March 2024

Find out what's new and trending in the Fabric Community.