cancel
Showing results for
Did you mean:
Highlighted
Member

## Dynamically change measure value depending on the axis and drill level

I have a simple chart like this:

Ignoring the stacked element, the bars show the measure [TotalSales]

I need to create a target line that is 80% of the measure value for the first month/year/day in the chart (depending on drill level)

For example, in the pic above I have harcoded the value at 28000 (based on totalsales for March) so it shows a straight target line. across. How do I create a measue that does this and dynamically changes based on the first day or month or year and also dynamically changes depending on the level drilled?

Ive tried something like this but to no avail:

```TargetSales = VAR SALESMARCH = CALCULATE(SUM(Sales[TotalSales]),CALENDAR("20180301","20180330"))
VAR PERCENT80 = SALESMARCH*0.8
RETURN PERCENT80```
1 ACCEPTED SOLUTION

Accepted Solutions
Community Support Team

## Re: Dynamically change measure value depending on the axis and drill level

Hi @rax99,

1. Create a date table and create relationship with the fact table.

2, To create a calculated column in the fact table.

`YEARMONTH = YEAR('Table1'[date])*100 +MONTH('Table1'[date])`

3. Create a measure as below.

```mea =
VAR countr =
CALCULATE ( DISTINCTCOUNT ( 'Table1'[date] ), ALLSELECTED ( Table1[date] ) )
VAR countrm =
CALCULATE ( DISTINCTCOUNT ( 'Table1'[date] ), ALL ( Table1 ) )
VAR mindate =
CALCULATE ( MIN ( 'Table1'[date] ), ALL ( Table1 ) )
VAR maxdate =
CALCULATE ( MAX ( 'Table1'[date] ) )
RETURN
IF (
ISBLANK ( countr ),
BLANK (),
IF (
countr > 1
&& countr < countrm,
CALCULATE (
SUM ( Table1[amount] ),
FILTER (
ALL ( Table1 ),
Table1[YEARMONTH]
= YEAR ( mindate ) * 100
+ MONTH ( mindate )
)
)
* 0.8,
IF (
countr = 1,
CALCULATE (
SUM ( Table1[amount] ),
FILTER ( ALL ( Table1 ), 'Table1'[date] = mindate )
)
* 0.8,
CALCULATE ( SUM ( Table1[amount] ), ALL ( Table1 ) ) * 0.8
)
)
)
```

For more details, please check the pbix as attached.

Regards,

Frank

Community Support Team _ Frank
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
2 REPLIES 2
Community Support Team

## Re: Dynamically change measure value depending on the axis and drill level

Hi @rax99,

1. Create a date table and create relationship with the fact table.

2, To create a calculated column in the fact table.

`YEARMONTH = YEAR('Table1'[date])*100 +MONTH('Table1'[date])`

3. Create a measure as below.

```mea =
VAR countr =
CALCULATE ( DISTINCTCOUNT ( 'Table1'[date] ), ALLSELECTED ( Table1[date] ) )
VAR countrm =
CALCULATE ( DISTINCTCOUNT ( 'Table1'[date] ), ALL ( Table1 ) )
VAR mindate =
CALCULATE ( MIN ( 'Table1'[date] ), ALL ( Table1 ) )
VAR maxdate =
CALCULATE ( MAX ( 'Table1'[date] ) )
RETURN
IF (
ISBLANK ( countr ),
BLANK (),
IF (
countr > 1
&& countr < countrm,
CALCULATE (
SUM ( Table1[amount] ),
FILTER (
ALL ( Table1 ),
Table1[YEARMONTH]
= YEAR ( mindate ) * 100
+ MONTH ( mindate )
)
)
* 0.8,
IF (
countr = 1,
CALCULATE (
SUM ( Table1[amount] ),
FILTER ( ALL ( Table1 ), 'Table1'[date] = mindate )
)
* 0.8,
CALCULATE ( SUM ( Table1[amount] ), ALL ( Table1 ) ) * 0.8
)
)
)
```

For more details, please check the pbix as attached.

Regards,

Frank

Community Support Team _ Frank
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Community Support Team

## Re: Dynamically change measure value depending on the axis and drill level

Hi @rax99,

Does that make sense? If so, kindly mark my answer as a solution to close the case.

Regards,
Frank

Community Support Team _ Frank
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.