cancel
Showing results for
Did you mean:
Frequent Visitor

## Calculate Overtime

I have the following table representing available and worked hours for each employee, in each day:

 Date Employee Hours Hour Type 01/05/2016 Marcelo 8 available 01/05/2016 Marcelo 9 worked 02/05/2016 Marcelo 8 available 02/05/2016 Marcelo 5 worked 03/05/2016 Marcelo 8 available 03/05/2016 Marcelo 9 worked

I created two measuares to represent the two different hour types "side by side":

Available Hours = calculate(sum(Table[Hours]);Table[Hour Type]="available")

Worked Hours = calculate(sum(Table[Hours]);Table[Hour Type]="worked")

Then I could create a pivot table like this:

 Date Employee Available Hours Worked Hours 01/05/2016 Marcelo 8 9 02/05/2016 Marcelo 8 5 03/05/2016 Marcelo 8 9 TOTAL 24 23

Then i created a different measure, to calculate the overtime:

Overtime = if([Worked Hours]>[Available Hours];[Worked Hours]-[Available Hours];0)

The result was:

 Date Employee Available Hours Worked Hours Overtime 01/05/2016 Marcelo 8 9 1 02/05/2016 Marcelo 8 5 0 03/05/2016 Marcelo 8 9 1 TOTAL 24 23 0

The problem is: the overtime is correct on the date level, but the result in the total level should be 2. What im I doing wrong?

2 ACCEPTED SOLUTIONS

Accepted Solutions
Community Support

## Re: Calculate Overtime

Hi @navarrobr,

In your scenario, you can create two new tables 'Woked' and 'Available', then build a relationship between those two tables. Please follow steps below:

1. Create 'Available' table.

`Available = SUMMARIZE('Table','Table'[Date],"Available Hours",CALCULATE(SUM('Table'[Hours]),'Table'[Hour Type]="available"))`

2. Create 'Worked' table' and a calculated column 'OverTime'.

`Worked = SUMMARIZE('Table','Table'[Date],"Worked Hours",CALCULATE(SUM('Table'[Hours]),'Table'[Hour Type]="worked"))`

`OverTime = IF('Worked'[Worked Hours]>RELATED('Available'[Available Hours]),[Worked Hours]-RELATED('Available'[Available Hours]),0)`

3. Build relationships.

4. Create a table visual.

If you have any question, please feel free to ask.

Best Regards,
Qiuyun Yu

Community Support Team _ Qiuyun Yu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Frequent Visitor

6 REPLIES 6
Super User IV

## Re: Calculate Overtime

I suspect that it is 0 in the total line because in the total line, your available hours exceed your worked hours. I'd have to test to be sure, but that is probably what is going on. You may have to ignore it and put a card visualization that just sums your Overtime.

---------------------------------------

Putting square pegs in round holes since 1972.

##### I have a NEW book! DAX Cookbook from Packt
Over 120 DAX Recipes!
Did I answer your question? Mark my post as a solution!

Proud to be a Datanaut!

Highlighted
Frequent Visitor

## Re: Calculate Overtime

Yes, this is probably what is going on. But i really need to perform this calculation in the pivot table, my guess is that the formula in the measure "Overtime" is wrong.

Super User IV

## Re: Calculate Overtime

I confirmed that the last column does not seem to be totaling for the column but rather doing the calculation for that Measure using the values in the Total row. I tested this by changing one of your 9's to a 19. My Overtime total (last row) ended up being 9, which was the difference between the total available and worked hours.

Should it work like this? Probably not I would suspect. You could file it under "Issues".

---------------------------------------

Putting square pegs in round holes since 1972.

##### I have a NEW book! DAX Cookbook from Packt
Over 120 DAX Recipes!
Did I answer your question? Mark my post as a solution!

Proud to be a Datanaut!

Super User IV

## Re: Calculate Overtime

Here is what I would do. Delete all of your measures. Edit your query and pivot on your "Hour Type" column with "Hours" as your values column. Then, you just create a custom column for Overtime and put everything in a Table. No need for pivot tables or matrices and all the numbers work.

Overtime Column:

`OvertimeHours = if([worked]>[available],[worked]-[available],0)`

Here is the test query I used:

```let
Source = Table.FromRows(Json.Document(Binary.Decompress(Binary.FromText("i45WMjDUNzDVNzIwNFPSUfJNLEpOzckHsiyAOLEsMTMnMSknVSlWB6dCSyAuzy/KTk2BqDIi1jjsCk3RjDMm1jjsCpFdFwsA", BinaryEncoding.Base64), Compression.Deflate)), let _t = ((type text) meta [Serialized.Text = true]) in type table [Date = _t, Employee = _t, Hours = _t, #"Hour Type" = _t]),
#"Changed Type" = Table.TransformColumnTypes(Source,{{"Date", type date}, {"Employee", type text}, {"Hours", Int64.Type}, {"Hour Type", type text}}),
#"Pivoted Column" = Table.Pivot(#"Changed Type", List.Distinct(#"Changed Type"[#"Hour Type"]), "Hour Type", "Hours", List.Sum)
in
#"Pivoted Column"```

---------------------------------------

Putting square pegs in round holes since 1972.

##### I have a NEW book! DAX Cookbook from Packt
Over 120 DAX Recipes!
Did I answer your question? Mark my post as a solution!

Proud to be a Datanaut!

Community Support

## Re: Calculate Overtime

Hi @navarrobr,

In your scenario, you can create two new tables 'Woked' and 'Available', then build a relationship between those two tables. Please follow steps below:

1. Create 'Available' table.

`Available = SUMMARIZE('Table','Table'[Date],"Available Hours",CALCULATE(SUM('Table'[Hours]),'Table'[Hour Type]="available"))`

2. Create 'Worked' table' and a calculated column 'OverTime'.

`Worked = SUMMARIZE('Table','Table'[Date],"Worked Hours",CALCULATE(SUM('Table'[Hours]),'Table'[Hour Type]="worked"))`

`OverTime = IF('Worked'[Worked Hours]>RELATED('Available'[Available Hours]),[Worked Hours]-RELATED('Available'[Available Hours]),0)`

3. Build relationships.

4. Create a table visual.

If you have any question, please feel free to ask.

Best Regards,
Qiuyun Yu

Community Support Team _ Qiuyun Yu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Frequent Visitor

## Re: Calculate Overtime

Announcements

#### Announcing the New Spanish Forum

Do you need help in Spanish? Check out our new Spanish community section.

#### April 2020 Community Highlights

Info on our Super Users, MBAS content and badges, and updates to our support articles. - Read the full Community Highlights.

#### MBAS Gallery 2020

Watch Microsoft Business Applications Summit sessions on-demand.

Top Solution Authors
Top Kudoed Authors