cancel
Showing results for
Did you mean:
Post Partisan

## Group column values based on condition

As per screenshot of table below, in the "Job to Accep Elapsed Time (Days)" column, how do I group values greater than 10? Expected value when DAYS >= 10, show "10+" instead. Hope that makes sense.

@wdx223_Daniel @Jihwan_Kim - appreciate any suggestions

1 ACCEPTED SOLUTION
Super User

Hi,

Please check the below picture and the attached pbix file.

Total jobs by group : =
CALCULATE (
[Total Jobs :],
FILTER (
VALUES ( Data[Category] ),
COUNTROWS (
FILTER (
GroupTable,
IF (
GroupTable[Max] <> BLANK (),
[Days :] >= GroupTable[Min]
&& [Days :] <= GroupTable[Max],
[Days :] >= GroupTable[Min]
)
)
) > 0
)
)

If this post helps, then please consider accept it as the solution to help other members find it faster, and give a big thumbs up.

Best regards, JiHwan Kim

4 REPLIES 4
Super User

Hi,

I do not know how your data model looks like, but check the below picture and the attached pbix file.

Days by group : =
CALCULATE (
VALUES ( GroupTable[Group] ),
FILTER (
GroupTable,
IF (
GroupTable[Max] <> BLANK (),
[Days :] >= GroupTable[Min]
&& [Days :] <= GroupTable[Max],
[Days :] >= GroupTable[Min]
)
)
)

If this post helps, then please consider accept it as the solution to help other members find it faster, and give a big thumbs up.

Best regards, JiHwan Kim

Post Partisan

@Jihwan_Kim   sorry I wasn't clear with my explanation and didn't provide enough information.

My expected result is to sum all jobs greater than 10 days into 10+ so as per screenshot sample below, the result will be (245+205+190+69+126+105) final result on table and chart will show 10+ = 940

Fyi the measures for the two columns in table:

``````TotalFailedJobsNextDay = CALCULATE(COUNTROWS('FreightForward v2'),FILTER('FreightForward v2','FreightForward v2'[BOOKING_BEFORE_AFTER_12]="AFTER 12" &&'FreightForward v2'[COMPLY_COMMENT]=BLANK() &&'FreightForward v2'[JOBCOUNT]=1))

=====================================================================================

Job to Accep Elapsed TIme Days = (DATEDIFF('FreightForward v2'[JOB_BOOKING_DATETIME],'FreightForward v2'[ACCEPTANCE_DATETIME],DAY ))``````

Hope that makes sense.

Super User

Hi,

Please check the below picture and the attached pbix file.

Total jobs by group : =
CALCULATE (
[Total Jobs :],
FILTER (
VALUES ( Data[Category] ),
COUNTROWS (
FILTER (
GroupTable,
IF (
GroupTable[Max] <> BLANK (),
[Days :] >= GroupTable[Min]
&& [Days :] <= GroupTable[Max],
[Days :] >= GroupTable[Min]
)
)
) > 0
)
)

If this post helps, then please consider accept it as the solution to help other members find it faster, and give a big thumbs up.

Best regards, JiHwan Kim

Post Partisan

@Jihwan_Kimawesome that worked as expected. Many thanks for your help, much appreciated

Announcements